Aug 022016
 

I’m trying my hand at you tube, making a parody of game cut scenes. It’s inspired by mans1ay3rs Gamer Poop. He seems to have stopped doing it due to contact problems with Machinima. So I like his stuff and there doesn’t seem to be anyone doing it so I thought I’d have a go. Currently doing the Witcher 3 which will probably take me around a year. If it works then more; if not, then I’ll go get some shit job somewhere.

Episode 1

If you enjoy it please like share and subscribe to Game Tripe.

Episode Playlist

Shorts Playlist

Share
Dec 252014
 

Synopsis

How to configuring a BT Home Hub 3.0 Type A to be a router for an Ethernet internet connection.

History

I have a satellite modem where I arrived from the UK, and knowing the sat modem had no wifi I  pre-bought, from eBay, a 5 pound BT homehub 3 router. Knowing the equipment to be good from consumer experience I thought it to be a good bet to get wifi for the sat connection.

Important !!!

This method only works on a BT Home Hub v3A firmware version less than 4.7.
Instructions on how to downgrade you firmware of a HomeHub 3A can be found here

Required

  1. BT Home Hub version 3A.
  2. Downgrade the home hub firmware version to less than 4.7 (info above)
  3. USB stick

Process

  1. Download and extract this.
  2. Run the “hh3a_unlock.exe”
  3. Connect the modem to the “BT Infinity” port on the BT home hub using a network cable.
  4. Connect you PC/Laptop to one of the other yellow Ethernet ports.
  5. Reset the HomeHub to defaults by long pressing the reset button on the back.
  6. Make the usb stick with “DiskImage_1_6_WinAll.exe” from the “hh3a_unlock” directory. Make it with “ext3.img”. Select the disk number not the letter.
  7. Plug the usb stick into the usb port on the home hub.
  8. Open up a command prompt and type net use z: \\192.168.1.254\usb1 /user:admin XXXXX where XXXX is your Home Hub admin password
  9. Copy the “smb.conf” and “utelnetd” into ‘z:\sys\etc’
  10. Type net use z: /d into your command prompt
  11. Unplug and re-plug the usb stick into the homehub.
  12. type net use z: \\192.168.1.254\usb1 /user:admin XXXXX where XXXX is your Home Hub admin password
  13. Now browse z: go in and out some directories.
  14. Telnet with ‘kitty’ or your telnet program to 192.168.1.254 port 4002
  15. If the port is not open browse a few more directories on z: and retry. I have had it take up to a minute to open the port.
  16. once the telnet program connects type the following

ssh_cli
conf set persistent/bt/domain_locking/enabled 0
conf del fw/policy/0/chain/fw_br0_in
conf del fw/policy/0/chain/fw_br1_in
conf set /admin/user/0/permissions/ssh 1
conf set bt/bt_agent/enabled 0
net wan_type_set eth
inet_connection ether dynamic_ip eth1
conf set dev/eth1/route_level 4
conf reconf 1

There it’s done. the above commands disable the BT backdoor and enable the ssh service. Then configures the infinity port to DHCP and puts it interface as a route out to the net. I now plugged the infinity port into my sat modem and I was able to use the net via the home hubs wifi or ethernet ports. The only problem is that if the hub loses power then you have to do the config again as it fails to load a few times then flashes the default firmware back. Oh well you’ll never need to turn it off anyway.

If you get lost in my instructions then you can check ‘How to unlock your Home Hub 3A _Now With added SSH Unlock.pdf’ included in the download.

Share
Jul 062010
 

Second-Hand-Hymen.com

For those girl who would really like to try their first time again; second-hand-hymen.com would provide the marketplace of hymens for woman who had a successful first time to sell to those who didn’t, at, of course, a small fee.

Frame-My-Hymen.com

For that interesting talking piece for the living room, for young sweethearts, frame that moment for all to see. Dried or in formaldehyde. If it was lost or destroyed in the process of the life changing event we can mock one up from chicken skin and black pudding.

Lost-And-Found-Virginity.com

After hearing many people have lost their virginity and after numerous calls to police stations and airport and train-station lost and found departments I have been unable to locate any lost virginity. Therefore I intend to setup lost-and-found-virginity.com where people can post lost virginities and with hope can be reunited with them by avid do gooders.

Swap-Your-Inlaw.com

Sees like in-laws can sometimes be a problem, the domain name as it suggests is a swap shop for in-laws. People can post all the qualities of the in-law they would like to swap and search for other or suitable in-laws posted by others and arrange a swap.

Share